Sump Pump With Low Rubber Material , Low Speed , High Head
Capability
Introduction:
Fratures of Vertical Rubber Sump Pump SVR-100R:
Fully Cantilevered – Eliminates submerged bearings, packing, lip
seals, and mechanical seals that other vertical slurry pumps
typically require.
Impellers – Unique double suction impellers; fluid flow enters the
top as well as the bottom. This design eliminates shaft seals and
reduces thrust load on the bearings.
Large Particle – Large particle impellers are also available and
enable passing unusually large solids.
Bearing Assembly – The maintenance friendly bearing assembly has
heavy duty roller bearings, robust housings, and a massive shaft.
Manufacturer and exporter of rubber lined slurry pumps, our product
range also comprises of abrasive slurry pumps, chemical process
slurry pumps and vertical extended shaft slurry pumps.
Specifications:
| Model | SVR-100R |
| Capacity | 54-289m3/h |
| TDH | 5-35m |
| Rated Motor Power | 75Kw |
| Speed | 500-1200r/min |
| Max. Efficiency | 56% |
| Standard Shaft Length | 1500mm |
Construction of Vertical Slurry Pump:
Materials of Construction:
| Part Description | Material |
| Casing | - Black Natural Rubber |
| Impeller | - Black Natural Rubber |
| Back Liner | - Black Natural Rubber |
| Shaft | Carbon Steel |
| Mounting Plate | Mild Steel |
| Strainers | Synthetic Rubber |
Specifications:
| Natural Rubber | Standard |
| Hardness(Shore A) | 52±3 |
| 300% Stretching Strength(MPa) | ≥4 |
| Tensile Strength(MPa) | ≥21 |
| Elongation at Break(%) | ≥500 |
| Tensile Set at Break(%) | ≤25 |
| Rubber to Metal Bonding Pull Strength(MPa) | ≥5 |
| Akron Abrasion cm3/1.61km | ≤0.08 |
| Acid & Alkali Resistant PH Value(Liquid) | 3-12≤65℃ |
Performance Curve:
Projects with Vertical Slurry Pumps:
SME SPR Sump Pump Orders:
